Connecting To An Amplifier Equipped With 5.1Ch Audio Inputs; Connecting To An Amplifier Equipped With A Digital Audio Input - Toshiba SD9500E Owner's Manual

Connecting to an amplifier equipped with 5.1ch audio inputs

5.1ch surround sound
The Dolby Digital, DTS and MPEG2 decoders equipped with this DVD player
enable you to obtain the full benefit of 5.1 channel sound tracks when you
connect the DVD player to an amplifier equipped with 5.1 channel audio inputs.
Amplifier equipped with
5.1ch audio inputs

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left
front speakers).
Amplifier equipped with
a digital audio input
To OPTICAL
type digital
audio input
Y C /P
B
CENTER
BITSTREAM
PCM IN /PCM OUT
COAXIAL OPTICAL COAXIAL OPTICAL SUBWOOFER SURROUND
AUDIO DIGITAL I/O
To 5.1ch audio
inputs
Audio cable
Y C /P
B
CENTER
BITSTREAM
PCM IN /PCM OUT
COAXIAL OPTICAL COAXIAL OPTICAL SUBWOOFER SURROUND
AUDIO DIGITAL I/O
To COAXIAL
type digital
To BITSTREAM/PCM OUT
audio input
Connect either.
75 Ω coaxial cable
Optical digital cable
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display
VIDEO OUT
"Audio Out Select"
VIDEO
D1/D2
C /P S
B R R
R L
L
5.1CH
2CH
SURROUND
R
FRONT BALANCED OUT
AUDIO ANALOG OUT
Recording system
To 5.1CH
SURROUND
2 channel sound is output in the Dolby Pro
AUDIO ANALOG
Logic format. To obtain the original 2
OUT
channel sound, select "Bitstream" or "PCM."
• Make the following setting.
On-screen display
"Audio Out Select"
VIDEO OUT
VIDEO
D1/D2
S
C /P
B R R
L R L
5.1CH
2CH
SURROUND
R
BALANCED OUT
FRONT
AUDIO ANALOG OUT
Select: Page
56
"Analog 6ch"
59
D
MPEG
42
DTS
Select: Page
56
"PCM"
59
23