Connecting To Optional Equipment - Toshiba SD9500E Owner's Manual

Connections

Connecting to Optional Equipment

You can enjoy high quality dynamic sounds by connecting the DVD player to
optional audio equipment.
• For connection to your TV, see "Connecting to a TV"
.
18 19
• For details of output sound, see
• This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Notes
• DO NOT connect the BITSTREAM/PCM OUT AUDIO
DIGITAL output jack of the DVD player to the AC-3 RF
input of a Dolby Digital Receiver. This input on your A/V
Receiver is reserved for Laserdisc use only and is
incompatible with the BITSTREAM/PCM OUT AUDIO
DIGITAL output jack of the DVD player.
• Connect the BITSTREAM/PCM OUT AUDIO DIGITAL
output jack of the DVD player to the "DIGITAL (OPTICAL)"
or "DIGITAL (COAXIAL)" input of a Receiver or Processor.
• Refer to the owner's manual of the connected equipment
as well.
• When you connect the DVD player to other equipment, be
sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the DVD player has a wide dynamic
range. Be sure to adjust the receiver's volume to a
moderate listening level. Otherwise, the speakers may be
damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the
DVD player's power cord. If you leave the amplifier power
on, the speakers may be damaged.
20
.
43
Warning
When you are connecting (via the BITSTREAM/PCM
OUT AUDIO DIGITAL output jack) an AV decoder that
does not have Dolby Digital, Digital Theater Systems
(DTS) or MPEG2 decoding function, be sure to set "Audio
Out Select" to "PCM" from the on-screen displays
. Otherwise, high volume sound may damage
56 59
your hearing as well as the speakers.