Connecting To An Amplifier Equipped With 5.1Ch Audio Inputs; Connecting To An Amplifier Equipped With A Digital Audio Input - Toshiba SD-520ESE Service Manual

Connections
Connecting to Optional Equipment (continued)

Connecting to an amplifier equipped with 5.1ch audio inputs

5.1ch surround sound
The Dolby Digital and MPEG2 decoders equipped with this DVD player enable
you to obtain the full benefit of 5.1 channel sound tracks when you connect the
DVD player to an amplifier equipped with 5.1 channel audio inputs.

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left
front speakers).
To OPTICAL
type digital
audio input
24
Amplifier equipped with
5.1ch audio inputs
To 5.1ch audio
inputs
Audio cable
Amplifier equipped with
a digital audio input
To COAXIAL
type digital
audio input
75 Ω coaxial cable
Optical digital cable
AUDIO OUT
VIDEO OUT
C Ls L ANALOG
Y 5.1CH
SURROUND
VIDEO
BITSTREAM
/PCM
P
B
SUB Rs R
SELECT
P R AV
I P R L COAXIAL OPTICAL
S 2CH
DIGITAL
To 5.1CH
SURROUND
AUDIO OUT
AUDIO OUT
VIDEO OUT C Ls L ANALOG
Y 5.1CH
SURROUND
VIDEO
BITSTREAM
/PCM
P B
SUB Rs R
SELECT
P
R AV
I P R L COAXIAL OPTICAL
S 2CH
DIGITAL
Connect either.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display Select:
"Analog Output" "Multi"
D/
Recording system
MPEG2
When " Pro Logic" is set to "On," 2 channel
sound is output in the Dolby Surround Pro
Logic format. To obtain the original 2 channel
sound, set " Pro Logic" to "Off".
• Make the following setting.
On-screen display Select:
"Digital Output" "PCM"
"Stereo"
"Analog Output"
Page
56
61
42
Page
56
62
56
61