Supported Memory Configurations - Intel D815EEA Technical Product Specification

Table 5.

Supported Memory Configurations

DIMM Number of
Capacity Sides
32 MB DS
32 MB SS
48 MB DS
64 MB DS
64 MB SS
64 MB SS
96 MB DS
96 MB DS
128 MB DS
128 MB DS
128 MB SS
128 MB SS
192 MB DS
192 MB DS
256 MB DS
256 MB DS
256 MB SS
512 MB DS
Notes
1. If the number of SDRAM devices is greater than nine, the DIMM will be double sided.
2. Front side population / back side population indicated for SDRAM density and SDRAM organization.
CAUTION
To be fully compliant with all applicable Intel
should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If
your memory modules do not support SPD, you will see a notification to this effect on the screen at
power up. The BIOS will attempt to configure the memory controller for normal operation.
However, DIMMs may not function under the determined frequency. You can access the PC Serial
Presence Detect Specification at:
http://www.intel.com/design/pcisets/memory/
SDRAM SDRAM Organization
Density Front-side/Back-side
16 Mbit 2 M X 8 / 2 M X 8
64 Mbit 4 M X 16 / empty
64 / 16 Mbit 4 M X 16 / 2 M X 8
64 Mbit 4 M X 16 / 4 M X 16
64 Mbit 8 M X 8 / empty
128 Mbit 8 M X 16 / empty
64 Mbit 8 M X 8 / 4 M x 16
128 / 64 Mbit 8 M X 16 / 4 M x 16
64 Mbit 8 M X 8 / 8 M X 8
128 Mbit 8 M X 16 / 8 M X 16
128 Mbit 16 M X 8 / empty
256 Mbit 16 M X 16 / empty
128 Mbit 16 M X 8 / 8 M x 16
128 / 64 Mbit 16 M X 8 / 8 M x 8
128 Mbit 16 M X 8 / 16 M X 8
256 Mbit 16 M X 16 / 16 M X 16
256 Mbit 32 M X 8 / empty
256 Mbit 32 M X 8 / 32 M X 8
®
SDRAM memory specifications, the motherboard
Product Description
Number of
SDRAM devices
16 (Note 1)
4
12 (Notes 1 and 2)
8
8
4
12 (Notes 1 and 2)
8 (Notes 1 and 2)
16 (Note 1)
8 (Notes 1 and 2)
8
4
12 (Notes 1 and 2)
16 (Notes 1 and 2)
16 (Notes 1 and 2)
8 (Notes 1 and 2)
8
16 (Notes 1 and 2)
21