Supported Memory Configurations - Intel DZ87KLT-75K Specification

Intel Desktop Board DZ87KLT-75K Technical Product Specification
CAUTION
1.5 V is the recommended and default setting for DDR3 memory voltage. The other
memory voltage settings in the BIOS Setup program are provided for performance
tuning purposes only. Altering the memory voltage may (i) reduce system stability
and the useful life of the system, memory, and processor; (ii) cause the processor and
other system components to fail; (iii) cause reductions in system performance; (iv)
cause additional heat or other damage; and (v) affect system data integrity.
Intel has not tested and does not warranty the operation of the processor beyond its
specifications. For information on the processor warranty, refer to
http://www.intel.com/support/processors/sb/CS-
020033.htm?wapkw=(processor+warranty).
Intel assumes no responsibility that the memory installed on the desktop board, if used
with altered clock frequencies and/or voltages, will be fit for any particular purpose.
Check with the memory manufacturer for warranty terms and additional details.
Table 5 lists the supported DIMM configurations.
Table 5. Supported Memory Configurations
DIMM
Capacity Configuration
1024 MB SS
1024 MB SS
2048 MB DS
2048 MB SS
4096 MB DS
4096 MB SS
8192 MB DS
Note: "DS" refers to double-sided memory modules (containing two rows of SDRAM) and "SS" refers to
single-sided memory modules (containing one row of SDRAM).
For information about...
Tested Memory
XMP Tested Memory
22
SDRAM SDRAM Organization
(Note)
Density Front-side/Back-side
1 Gbit 128 M x8/empty
2 Gbit 128 M x16/empty
1 Gbit 128 M x8/128 M x8
2 Gbit 128 M x16/empty
2 Gbit 256 M x8/256 M x8
4 Gbit 512 M x8/empty
4 Gbit 512 M x8/512 M x8
Refer to:
http://support.intel.com/support/motherboards/desktop/sb/CS-
025414.htm
http://www.intel.com/personal/gaming/extremememory.htm
Number of SDRAM
Devices
8
4
16
8
16
8
16