Service Position; Checking & Repairing Of Panel P.c.b; Checking & Repairing Of Smps P.c.b - Panasonic SA-XH20PH Service Manual

13 Service Position

Note: For description of the disassembly procedures, see
the Section 12.
13.1. Checking & Repairing of Panel
P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Remove Tray Ornament.
Step 3 Remove Front Panel Block Assembly.
Step 4 Place the Front Panel Block Assembly on the insulated
material as diagram shown.
Step 5 Connect 17P FFC at the connector (CN203) on Main
P.C.B..
Step 6 Proceed to check and repair Panel P.C.B..
13.2. Checking & Repairing of SMPS
P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Remove SMPS P.C.B..
Step 3 Place the SMPS P.C.B. on the insulated material.
Step 4 Connect 12P cable at the connector (CN100) on Main
P.C.B..
Step 5 Proceed to check and repair SMPS P.C.B..
70