Disassembly Of Power Button P.c.b - Panasonic SA-XH20PH Service Manual

12.8. Disassembly of Power Button
P.C.B.
• Refer to "Disassembly of Top Cabinet".
• Refer to "Replacement of Tray Ornament".
• Refer to "Disassembly of Front Panel Block Assembly".
Step 1 Remove 1 screw.
Step 2 Lift up the Power Button P.C.B. as direction of arrow.
Caution: During assembling, ensure that the Power Button
P.C.B. is located properly and fully seated onto the Front
Panel Block Assembly.
Step 3 Release the 3P Cable from the ribs of the Front Panel
Block Assembly.
Caution: During assembling, ensure that 3P Cable is prop-
erly dressed into the ribs of the Front Panel Block Assem-
bly as diagram shown.
Step 4 Desolder the 3P Cable at the cable holder (H901) on
Power Button P.C.B..
Step 5 Remove the Power Button P.C.B..
54