9 Service Mode
9.1.
Cold-Start
Here is the procedure to carry out cold-start for initialize to shipping mode.
1. Unplug AC power cord
2. Press & hold [
] button
3. Plug AC power cord while [
FL Display will show "_ _ _ _ _ _ _ _"
4. Release [
] button
9.2.
Panel Code Setting Operation
9.2.1.
Checking of Panel Code
1. In STOP (no disc) mode, press [OPEN/CLOSE] button on main unit, and [6] button on the remote control unit.
FL Display:
Display is automatically clear after 5 seconds.
Note: Refer to Figure 9.2.1 for "Video Design Information".
] button being pressed
24