Caution : During assembling, insert the shaft of the Jack
Lid into hole A, then press & push the shaft into hole B.
10.30. Disassembly of Main P.C.B.
• Refer to "Disassembly of Base Stand Assembly"
• Refer to "Disassembly of Door Assembly"
• Refer to "Disassembly of Front Ornament Unit"
• Refer to "Disassembly of Front Panel Block"
• Refer to (Step 1) - (Step 4) of item 10.22.
• Refer to (Step 1) - (Step 3) of item 10.24.
• Refer to "Disassembly of CD Mechanism"
Step 1 : Detach 2P wire at the connector (CN401) on the Main
P.C.B..
Step 2 : Release the 2P wire from the slots.
Caution : During assembling, dressed the 2P wire into the
slots.
71