Step 3 : Connect 4P wire at the connector (CN931) on the
Motor P.C.B..
Step 4 : Dress the 4P Wire into the slot.
Step 5 : Fix 2 screws.
10.12. Disassembly of Motor P.C.B.
• Refer to "Disassembly of Gear Box Assembly"
Step 1 : Release 1 catch.
Step 2 : Remove the Motor P.C.B. as shown.
Caution 1 : During assembling, insert the Motor P.C.B.
underneath the rib.
Caution 2 : During assembling, ensure the Motor P.C.B. is
fully catched and seated on the locator.
Step 3 : Release the 2P Wire from the slots.
Caution : During assembling, ensure the 2P wire is
dressed into the slots.
48