Doctor Mode Table - Panasonic SC-HC37GN Service Manual

8.3.

Doctor Mode Table

Note : To enter the Doctor Mode, please use HC35 remote control.
Here is the procedures to enter into Doctor Mode.
Step 1 : Turn on the unit.
Step 2 : Select CD mode.
Step 3 : Pressing and hold [ ] on main unit then press [4] follow by [7] using the remote control.
Step 4 : The display show as follow.
To exit the Doctor mode
Use either one of the following methods to cancel the Doctor mode.
• Press the power button of the unit or using the remote control.
• Unplug the AC cord.
8.3.1. Doctor Mode Table 1
Item
Mode Name
Doctor Mode To enter into Doctor Mode
for checking of various
items and displaying
EEPROM and firmware ver-
sion.
Note: The micro-processor
version as shown is an
example. It will be revise
when there is an updates.
FL Display sequence Dis-
play 1
Description
Version Display
(DEC)
2
The Checksum of EEPROM and firmware
version will be display for 2 sec.
FL Display
(Display 1)
Check sum
(HEX)
Checksum : (Condition 1)
No Rom correction
(Display 2)
19
Key Operation
Front Key
In any mode:
Press [ ] button on main unit follow by
[4] & then [7] on the remote control of
HC35.
To exit Doctor Mode, press [TA]
on main unit or on the remote control of
HC35.
button