Table of Contents
Advertisement
Set Up as easy as 1,2,3
•
•
•
•
•
•
•
Installing Your Vista 100 Phone
1
1
Connect the receiver and receiver
cord
.
5
Attach the language faceplate.
† For wall mounting we recommend that you use a wall mounting plate, which your local telephone company
can install. The excess line cord fits into the stand of the phone for wall mounting.
•
•
•
•
•
•
•
•
2
Desk Mount
Attach the wedge-shaped base in
desk mount or wall mount
6
Attach the receiver card and lens
(shiny-side down).
•
•
•
•
•
•
•
•
3
Wall Mount
Connect the line cord
†
position.
7
Place you Vista 100 Phone on a
table or hang it on a wall. Then fit
the Discovery Card over the keys on
the phone
When you have power:
When you plug in your new phone, you may see a message on the display ask-
ing you to make a language selection. Read the directions on the display to
select one of two languages.
Vista 200 also runs a test to ensure that the phone cords are connected properly. If
the test fails, the display will prompt you to check the phone cords. Make sure
all connections are fastened securely.
•
•
•
•
•
•
•
•
4
Connect the power adaptor
.
•
•
•
•
•
•
•
•
.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nortel Vista 100
Summary of Contents for Nortel Vista 100
- Page 1 † position. Attach the language faceplate. Attach the receiver card and lens Place you Vista 100 Phone on a (shiny-side down). table or hang it on a wall. Then fit the Discovery Card over the keys on the phone...
-
Page 2: Setting The Time And Date
• • The next step in setting up your telephone is to customize Vista 100’s fea- After you have set up your phone, save emergency numbers and phone numbers of tures. Vista 100 gives you five feature options that let you personalize your your family and friends in Vista 100’s six memory keys. -
Page 3: To Protect The Contents Of Your Memory Keys
• To save an ON key for a feature To save a OFF key for a feature Now that your Vista 100 telephone is set up, you can start discovering Vista 100’s fea- 1. Press Ó. 1. Press Ó . -
Page 4: Troubleshooting
When you have a power failure. Vista 100 will still operate as a regular telephone during a power failure, but the dis- play will not operate until the power is restored. If all else fails, your local telephone company will be happy to help you.
Need help?
Do you have a question about the Vista 100 and is the answer not in the manual?
Questions and answers
Our Vista 100 records a message, but the red message light does not flash. We can pick up the message in the usual manner. Help.
Is the problem with the phone or our service provider.
The red message light on the Nortel Vista 100 may not be flashing because the light stays ON when features are not in use, and the display will not operate during a power failure. Also, the manual does not mention that the Vista 100 has a flashing message light feature for new messages. Therefore, it may not be designed to flash to indicate new messages.
This answer is automatically generated
je n'entent pas et l'appelent ne m'entent pas
You may not hear or be heard during calls on the Nortel Vista 100 if the receiver cord is not inserted securely into the jack. Make sure the receiver cord is properly connected.
This answer is automatically generated
I have a message left on this phone and I can't retrieve it. I don't remember the password. How do I change the password so I can see what message has been left?