IBM Infoprint Color 8 User Manual page 127

3.Beginning with section #1, find the box
which shows no color in the spaces
between the black lines, and make a note
of its number.
Not this:
This:
4.The display now reads ADJUST #1, with
the number 0 on the second line. Press
to increase the number or
it, until the second line reads the number
of the box which shows no color in the
spaces.
5.Press Menu 2 to move to section #2
(display: ADJUST #2), and repeat the
process to select the box which shows no
color in the spaces between the black
lines.
6.Continue to select the correct boxes for all
sections through section #9. If you need to go
back, hold Menu 1 down to move backwards
through the menu.
7.When you are satisfied with your selections,
move through the menu until PRINT EXECUTE
appears.
8.Press Enter. Another test pattern prints and the
display shows EXIT.
9.Check the results. This time the box where no
color shows should be box 0 in each section. If it
is, press Online to finish the adjustment. If it is
not, press Menu 2 and repeat the process.
to decrease
127
Level 2 menu