Installation Instructions - SUNWIND XC-60 Instruction Manual

INSTALLATION INSTRUCTIONS

It is advisable to clean the inside of the absorption refrigerator with lukewarm water using a
mild detergent, and then to dry it thoroughly prior to use.
LEVELLING AND VENTILATION
The refrigeration system of the cabinet is designed to operate with the cabinet
located on a flat surface. Avoid tilting the cabinet side.
If the cabinet must be tilted on an angle for handling or moving purposes, allow it to
sit in an upright position 20 to 30 minutes prior to plugging it in and starting the
cooling of the storage compartment.
Please observe the following recommended.
To ensure the circulation, the unit should be kept at 2.5 cm, away from the rear wall
and possible side walls. The clearance above the refrigerator should be at least
100 mm.
Locate the unit away from direct sunlight. This will enable you to obtain the best
performance and save energy.
Further the room should have a window (which can be opened) or a door to the
outside.
It is important that the refrigerator is not subject to radiation of heat from a stove
etc.
For best performance also at high ambient temperatures there must be a free air
circulation over the cooling unit at the rear of the refrigerator.
The refrigerator is designed for a free-standing installation.
45