Ballast Assy And Filter Duct Assy Removal - Sanyo PDG-DET100L Service Manual

Mechanical Disassembly
(T3x8)

10 Ballast assy and Filter duct assy removal

1 Remove 3 screws-A (T4x10) and take the ballast assy off.
 Remove the filter cover and filter cartridge.
3 Remove 4 screws-B (T4x10) and take the Filter duct assy off.
Ballast assy
Transparent tube
Wiring on optical lamp cover (Bottom side)
Optical lamp
cover shield
Optical lamp
duct A
Optical lamp
duct B
A
A
A
Black tube
SW903
ID I/F 1 board
B
B
B
B
-33-
SW904
ID I/F  board
Filter cartridge
Filter duct assy
Filter cover