Mounting Duct, Fan(Fn903, Fn904, Fn905) And Filter Board Removal - Sanyo PLC-XU350 Service Manual

Mechanical Disassembly
b Mounting Duct, Fan(FN903, FN904, FN905) and Filter Board removal
1. Remove screw A (M4x4) , 2 screws B (T3x12) and 4screws C (T3x6) to remove the Mounting duct top,
Mounting duct bottom and fan (FN904).
2. Remove 2 screws D ( T3x12) to remove the fans (FN903 and FN905).
3. Remove screw E (T3x8) and screw F (M3X8) to remove the Left side shield.
4. Remove 2 screws G (T3x8) to remove the filter board.
5. Remove the Air filters.
F (M3x8)
E (T3x8)
Left side shield
Filter Board spacer sheet
Air filter
C
D(T3x12)x2
Mounting duct
top
FN903
FN905
G (T3x8) x2
G
Filter Board
Air filter base
B (T3x12)x2
B
C T(3x6)x4
C
C
D
A
Mounting duct
bottom
-16-
A M4x4)
FN904
Air filter
Fig.5