Treatment Of Submerged Motor - Yamaha E40X Owner's Manual

6. Insert the knotted end of the emergency
starter rope into the notch in the flywheel
rotor and wind the rope several turns
around the flywheel clockwise.
7. Give a strong pull straight out to crank
and start the engine. Repeat if neces-
sary.
EMU29760

Treatment of submerged motor

If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately.
If you cannot immediately take the outboard
motor to a Yamaha dealer, follow the proce-
dure below in order to minimize engine dam-
age.
EMU29771
Procedure
1. Thoroughly wash away mud, salt, sea-
weed, and so on, with fresh water.
ZMU03084
2. Remove the spark plugs and face the
spark plug holes downward to allow any
water, mud, or contaminants to drain.
3. Drain the fuel from the carburetor, fuel
filter, and fuel line.
4. Feed fogging oil or engine oil through
ZMU03085
the carburetor(s) and spark plug holes
while cranking with the manual starter or
emergency starter rope.
5. Take the outboard motor to a Yamaha
Trouble Recovery
ZMU01909
ZMU01910
ZMU01911
73