Pioneer XV-HTD510 Service Manual page 94

XV-HTD510, XV-HTD510-B
1
Motor (for Tray), Motor Pulley (for Tray Motor)
Adjust the height of the Motor Pulley to 2.4mm.
Motor Pulley
Motor
Wiring lead wires into the hook of Motor Holder.
(So that lead wires are caught at the Tray open or close.)
Motor
2
Motor Holder
Apply Lubricating Oil (GYA1001) to the holder part.
Apply Lubricating Oil (GYA1001)
94
2.4mm
Red Red
Black Black
SSRB Assy
Motor Holder
Apply Lubricating Oil
(GYA1001)
3
Worm Gear and Tray Belt
Tray Belt
Be carefull not to damage it in exchange.
Worm Gear
Apply the one round Lubricating Oil (GYA1001)
4
Tray Gear
Apply the one round Lubricating Oil (GYA1001)
5
Clamper Plate
Apply the adhesive on the inside of hooks.
(Prevention of dropping)
6
Motor (for Loading), Motor Pulley (for Loading Motor)
Adjust the height of Motor Pulley to 6.2mm.
Motor Pulley
Motor
Motor Holder
Tray Gear
Clamper Plate
6.2mm