Technical Information
Figure 030-2: Heater Element Replacement
4.3
Door Seal - Removal
1. Remove the Front Panel (010 4.3)
2. Unscrew the Seal Clamp Ring from the suds container.
3. Remove the water inlet hose.
4. Remove the Light Assembly.
5. Remove the Seal from the suds container.
4.4
Imbalance Sensor - Removal
1. Remove the Front Panel (010 4.3).
2. Remove the Imbalance Sensor retaining screws.
3. Disconnect the hose connections.
4. Remove the Imbalance Sensor.
W1113, W1119, W1203, W1213 & W1215 Clothes Washers
26