Lacing Aall Hile; Another Line; Receivinga Call While; T A L - GE 29481G1 User Manual

P C
LACING A ALL
To place a call without hanging up on the first call:
1. Press the HOLD button to put the first call on hold.
2. Press the available line button to get a dial tone. Press the SPEAKER
button if the speakerphone indicator is off and you are using the
speakerphone.
3. Dial the number you want to call.
R A C
ECEIVING
When you receive a call while you are talking on another line, you will
hear the phone ring.
1. Press the HOLD button to put the first call on hold.
2. Press the line button next to the flashing red indicator.
3. If the speakerphone indicator is off and you are using the speakerphone,
press the SPEAKER button.
NOTE: You must always put the first call on hold before answering a second call
or you will hang up on the first call. If you want to disconnect from the first call,
don't press the HOLD button (skip step 1) and press the flashing line button.
A
DJUSTING THE
The volume controls for the handset and speakerphone are separate, so
you can adjust one without affecting the other. To adjust the handset
volume, pick up the handset, press the volume button continuously or
press the review button
(handset receiver) or SPK volume level shows in the display. While using
the speakerphone, adjust the speakerphone volume by pressing the
volume button continuously or pressing review button
the volume button. Both handset receiver and speakerphone volume level
setting may be saved in the unit's memory.
W T
HILE

ALKING ON

W T
ALL HILE ALKING ON
H
ANDSET AND
or after pressing the volume button. REC
A
NOTHER
A
NOTHER
S
PEAKERPHONE
L
INE
L
INE
V
OLUME
or after pressing
25