Ecords; Deleting Call Records; Dialing Back - GE 29481G1 User Manual

75 calls for later review. When the memory is full, a new call automatically
replaces the oldest call in memory. NEW appears in the display for calls
received that have not been reviewed. The red NEW CALL indicator blinks,
which means you have received new calls.
R C
EVIEWING ALL
• Press the or button to view the call records.
• Press the " " button to scroll through the call records from the most
recent to the oldest.
• Press the " "button to scroll through the call records from the oldest to
the newest.
• When all of the records have been viewed, START/END appears in
the display.
D C
ELETING ALL
• To delete the record shown in the display, press the ERASE button once.
• To delete all records while reviewing, press and hold the ERASE button
for about three seconds. ERASE ALL? appears in the display. Press
ERASE again to complete.
D B
IALING ACK
When reviewing Caller ID records, you can dialback the numbers shown
on the display by pressing the DIAL button.
NOTE: If PICKUP PHONE shows in the display, no other changes to the
number can be made. The information sent from the telephone company is
known to be a valid number for dialing back (used only in very limited areas).
Once you pickup the phone, the number is automatically dialed.
NOTE: Make sure either line button 1 or 2 is pressed, when the handset is
picked-up or the speakerphone is in use.
R

ECORDS

R
ECORDS
19