S.E.M. Santos Z-7788 User Manual page 19

DVD OPERATION
2. Setup items introduction
System setup
• TV system
Check the color system of your TV, the you can choose the TV system required in the
DVD setup menu.
- NTSC : Choose this setting if your DVD player is connected to a ntsc TV.
- PAL : Choose this setting if your DVD player is connected to a pal TV.
- AUTO : Choose this setting if your DVD player is connected to a Multi-system TV.
• Screen saver
If the screen saver is on, when your DVD player is in Stop, Open, or a No Disc state, or
there is a frame frozen for more than 3 minutes, the screen saver will be displayed. This
feature can protect the screen From being damaged.
- On : Choose this setting to activate the screen saver.
- Off : Choose this setting to cancel the screen saver.
• VIDEO
- Interlace-yuv : Choose this setting if your DVD player is connected to a TV with Y, CB,
CR video cables.
- P-scan : Choose this setting if your DVD player is connected to a progressive scan TV
with Y, PB, PR video cables.
- S-video : Choose this setting if your DVD player is connected to a TV with S-VIDEO
cables.
NOTES :
- If composite video is connected to your TV, the submenu INTERLACE-YUV must be selected.
- If the component cable (Y, PB/CB. PR/CR) is connected to your TV, for interlace TV or progressive scan
TV, the submenu P-SCAN YPBPR must be selected.
REMARK : Do not connect component cable or S-VIDEO to TV simultaneously.
E-16