How To Play Mp3 Discs - S.E.M. Santos Z-7788 User Manual

CD-MP3
5. Repeat above two steps for programming. Once complete, use the above mentioned
navigational keys to highlight the "play" option on screen, then press the Enter key to
begin program playback.
6. To stop playback from program memory but keep the program in memory, press the Stop
key. Press the Play/Pause key to resume normal playback, or access the program menu
to begin program playback.
7. To clear (cancel) the entire program which stored in the memory, simply enter into the
program menu, using the Prog/Mem. key, and select the "clear" option by using the
navigational and Enter keys.
Note: The programming is cleared automatically as soon as the disc compartment opened.

HOW TO PLAY MP3 DISCS

- Switch "on" the unit using the On/Standby key.
- Insert an MP3 CD into the player as described.
- Playback shall begin automatically in a few seconds and disc menu displayed on the tv
screen, if connected to the tv.
, Tune Down/
- Use the or
and highlight the desired folder and fi le. Press enter key to start playback of highlighted
fi le or fi rst track of highlighted folder.
- At anytime during playback, press and release the Next or Back key to skip forward or
backwards by one track, as desired.
- At anytime during playback, press and hold the Next or Back key to select speed at
which to fast-forward (cue) or fast-reverse (review) the specifi c track:
- During fast-forward or fast reverse, press the Play/Pause key to resume normal playback.
- At anytime during playback, press the stop key to stop playback from the set.
This will reset the set to the fi rst track, whereby pressing the Play/Pause key, after the
stop key, shall start playback from the fi rst track and folder on the CD-disc.
Note: For CD-MP3 discs the reading time may exceed 10 seconds due to the large number
of songs compiled onto the disc.
or Tune Up/
2X 4X
E-11
navigational keys to enter the directory
8X 20X