Cd Audio; Insertion & Removal Of Discs - S.E.M. Santos Z-7788 User Manual

CD AUDIO

INSERTION AND REMOVAL OF DISCS
- Press the DVD/USB/SD key on the remote control until disc mode is indicated on the
LCD display. Use the Open/Close key to slide open/close the disc tray.
- Carefully place a compact disc (CD/CD-MP3/DVD) onto the center spindle with the label
side (printed side of disc) facing upwards. Close the disc tray.
- After a few seconds, the disc will begin automatic playback or display the disc's front
menu (dependent on disc type and format).
Important: always hold a CD by it's edges. Avoid getting any fi nger-prints, smudges or dirt
onto the surface of a disc. In case this happens, use a special CD-cleaning cloth or cleaning
kit to remove the dirt or smudges.
NORMAL CD OPERATION
- Press On/Standby key to switch on the unit and insert a CD disc as described. Playback
shall begin automatically in a few seconds.
- At anytime during playback, use the Play/Pause key to pause or resume playback of disc.
- At anytime during playback, press the Stop key to stop operation of the set. Press the
Stop key twice to reset the set to the fi rst track (if you press the Play/Pause key, the fi rst
track shall begin playback).
- At anytime during playback, press and release the Next/Mem.
to skip forward or backwards by one track, as desired.
- At anytime during playback, press and hold the Next/Tune Up or Back/Tune Down key
to select speed at which to fast-forward (cue) or fast-reverse (review) the specifi c track:
- During fast-forward or fast reverse, press the Play/Pause key to resume normal playback.
2X 4X
E-9
or Back/Mem.
8X 20X
key