Operation Of Radio - S.E.M. Santos Z-7788 User Manual

RADIO

OPERATION OF RADIO

- Press Tuner/Band on main unit or Tuner/Band on remote control to select tuner fm or
am band.
- Press and hold Tune Down/
once a station is found, the search will automatically stop.
- To tune to a weak station, briefl y press Tune Down/
until the display shows the desired frequency or when the best reception has been obtained.
RADIO MEMORY (STATION PRESET MEMORY STORAGE)
1. Press Tuner/Band to select the desired waveband: am or fm.
2. Press Tune Down/
3. Press Prog/Mem. Key on remote control to active the preset number for storing.
4. If you wish it store the radio station to another preset number, press
/Mem. to select the desired present number.
5. Press Prog/Mem. On remote control to store the radio station.
- Repeat Step 1 to 5 to store other preset radio stations.
*Note:
- During programming, if no button is pressed within approx. 10 Seconds the system will
exit program mode automatically.
- To recall any saved memory, simply
will be recalled.
- To clear the memory of any position, simply save a new station to the same memory
position.
- You can store up to 20 stations for fm and 20 for am in the memory. When a preset radio
station is selected, the preset number appears on the display.
TUNING TO A RDS STATION (FM ONLY)
In tuner fm mode, press Tune Down/
Press /Mem.
DISPLAY RDS STATION INFORMATION
Press OSD/Info key on the remote control to display station information:
1. RDS NAME
2. RADIO TEXT
3. RXS TYPE (PTY)
4. RDS TIME
5. PI CODE
or Tune Up/
or Tune Up/
or /Mem. key on the remote control to select preset RDS station.
key to search stations automatically,
or Tune Up/
key to get to the desired frequency.
/Mem. or /Mem.
or Tune Up/
key to tune to a rds station.
E-8
key repeatedly
/Mem.
or
, the saved radio band