Satellite System Control Unit (Scu) - Audiovox SRSIR-001 Owner's Manual

The FM Switching Box, in turn, is capable of transmitting on seven (7) FM
frequencies; namely, 88.1MHz, 88.3MHz, 88.5MHz, 88.7MHz, 88.9MHz,
89.1MHz and 89.3MHz.
The frequency is selected using the FM band of the existing vehicle radio.
(The default FM frequency is 88.5MHz.) Select the FM frequency having
the least noise or static, and then use the SCU to choose the SIRIUS ®
channel for your listening pleasure.
SATELLITE RADIO RECIEVER
UNIT (RRU) SRSIR-001
FM SWITCHING BOX ASSY
(used with RRU / SRSIR-001FM only)
RCA to RCA CABLE

SATELLITE SYSTEM CONTROL UNIT (SCU)

The SCU provides for complete control of the system by means of its
Liquid Crystal Display (LCD) and associated function buttons.
This Manual: http://www.manuallib.com/file/2669411
AUDIO OX
-or-
AUDIO OUT
TER. SAT. TO SCU R L POWER TER.
SATELLITE RADIO RECIEVER
UNIT (RRU) SRSIR-001FM
POWER HARNESS
SATELLITE CONTROL
UNIT (SCU) SRSIR-001
SATELLITE ANTENNA
(PURCHASED SEPARATELY)
Figure 1. SIRIUS® Satellite Receiver System
AUDIO OX
1. Liquid Crystal Display (LCD): Presents a display of various broad-
AUDIO OUT FM
SAT. TO SCU R L OUT POWER
cast, song title, performer(s), advisory/error messages, etc.
2. Down Directional ( ) Button: When momentarily pressed and re-
leased, the channel number will decrease with each press; when pressed
and held, the channel number will decrease continuously. Release the
3 button when the desired channel number is displayed. When used in
1 2
4 5 6
7 8 9
0
conjunction with the Shift (SFT) button, the MUTE function is enabled.
AUDIO OX SFT
(See Mute Function Button section below)
3. Keypad Buttons 0-9: These buttons are used to directly enter a desired
channel number. Momentarily press the Shift (SFT) button followed by
the desired channel number then the Shift (SFT) Button. They are also
used when entering and recalling preset channel numbers into memory.
6-DIN CABLE
4. Up Directional ( ) Button: When momentarily pressed and released,
the channel number will increase with each press; when pressed and
held, the channel number will increase continuously. Release the button
when the desired channel number is displayed. When used in conjunc-
tion with the Shift (SFT) button, the SCAN function is enabled. (Refer
Mute Function Button section)
5. Infrared Detector: Provides detection of the infrared control signal
transmitted by an optional wireless remote control unit (P/N SAT-
RC) for remote operation. Make sure no obstructions are blocking the
signal path.
6. Shift (SFT) Button: When momentarily pressed, this button pro-
vides access to additional functions, such as audio MUTE, Channel
SCAN, Direct Channel Access, Category Select, Parental Lock-Out
etc.
3
2, 8
1
1 2 3
4 5 6
7 8 9
0
AUDIO OX
SFT
7
5
6
Figure 2. Satellite System Control Unit (SCU)
3
4
9
128-6374
3 of 12