Anti-Scalp Wheels - HUSTLER raptor Operator's Manual

A
A. Adjusting pin
Figure 3-20

Anti-Scalp Wheels

Anti-scalp wheels are standard on these mowers. These
wheels are designed to minimize scalping when mowing on
rough uneven terrain. Figure 3-21
Anti-scalp wheels can be installed in two positions. With
the wheel installed in the bottom hole, the wheel is located
1.60" (40.6 mm) below the mower blades. This setting is pre-
605686
ferred when mowing at cutting heights of 2-1/2" (63.5 mm) or
higher.
When the wheel is mounted in the top hole, it is located
.70" (17.8 mm) below the mower blades. This is the accept-
able setting for mowing at cutting heights of 1-1/2"
(38.1 mm) or higher.
B
A. Adjusting holes
3-11
A
B. Anti-scalp wheel
Figure 3-21
REV E