Technical Data - Hilti AG 125-S Operating Instructions Manual

AC-D INOX
AG-D universal premium
AG-D universal super premium
AF-D abrasive flap disc
Products supplied by other manufacturers
(Max. dia. 125 mm, max. speed 11,000 r.p.m., max. disc peripheral speed 80 m/sec.)
Wire brushes
Cup wheels, rubber backing pads
Other accessories
Kwik-Lock quick-release clamping nut
Dust extraction hood for grinding
Disc guard with carriage
Dust extraction hood for cutting
Vacuum cleaner
3.1 Kwik-Lock quick-release clamping nut for cutting or grinding discs
The Kwik-Lock nut can be used instead of the standard clamping nut. No tools are
then required for changing cutting or grinding discs.
-NOTE-
The Kwik-Lock nut cannot be used in conjunction with abrasive cup wheels, brush-
es, rubber backing pads, tuck pointing discs or diamond cup wheels.
3.2 Dust extraction hood for grinding work
The tool is suitable only for occasional grinding of mineral materials with diamond
cup wheels.
-NOTE-
The tool may be used for this application only when equipped with the appropriate
dust extraction hood and when connected to a suitable vacuum cleaner.
3.3 Disc guard with carriage
The tool should be equipped with the carriage when used for cutting applications.
3.4 Dust extraction hood
In principle, we recommend use of a dust extraction hood and suitable Hilti vacuum
cleaner with the tool for all concrete or stone slitting or cutting applications.
These accessories reduce the amount of dust to which the operator is exposed and
extend the life of the tool and disc.

4. Technical data

Tool
Rated voltage
Rated current
Power input
Power output
Electric supply frequency
No-load speed
Drive spindle thread
Cutting disc diameter
Approx. weight (without accessories)
Double insulation (as per EN 50144)
Interference immunity
Radio and television interference suppression as per EN 55014-1
Printed: 07.07.2013 | Doc-Nr: PUB / 5069435 / 000 / 00
Cutting
Grinding
Grinding
Grinding
DG125-EX
DC125-EX
TDA-VC40/60
AG125-S / AG125-SE
110 V 230 V 240 V
8.8 A 4.5 A 4.3 A
1020 W
550 W 600 W 600 W
50 Hz
AG125-S:E 11000 r.p.m.
AG125-SE: 2800–11000 r.p.m.
M 14
max. 125 mm
1.6 kg
Protection class II Z
as per EN 55014-2
15