DC 180-S diamond cutter To ensure correct use, please read the complete operating instructions carefully before the tool is operated for the first time. All instructions concerning the use of the tool are given also for your own safety! Always keep these operating instructions together with the tool. Ensure that the operating instructions are with the tool when it is given to other persons.
Other applications such as cutting-off or wire brushing, may have different vibration emission values. The tool is designed for the following uses: Diamond cutting disc Use / base material Hilti insert tool: DC- D 180 C1 concrete / cement DC- D 180 C2 concrete / hard rock...
Ear protection must be Safety gloves must be Eye protection must be Respiratory equipment Safety overalls must be Read the operating worn worn worn must be worn worn instructions lection facilities ensure these are connected and prop- Safety precautions erly used. (Please read and keep these instructions) ■...
■ The tool may be used for dry grinding / cutting only. respective safety regulations. Repairs may only be car- ■ Grinding or cutting materials containing asbestos is ried out by a Hilti service centre. Only original Hilti spare parts may be used otherwise an accident hazard for the not permitted.
Caution: Press the spindle lockbutton only when the spindle ¾ has stopped rotating. Caution! Only use the Kwik-lock nut on the Hilti DC180-S cutter. Do not use the Kwik-lock nut with cup Clean the clamping flange and clamping nut wheels and brushes.
3 functions: The DC180-S diamond cutter is particularly suitable for – Release use with dry-cutting diamond discs. A range of Hilti dia- – On / off switch mond discs is available. – Lock Dry-cutting diamond discs may overheat and thus suf-...
Manufacturer's warranty – tools Repairs / Carbon brushes Hilti warrants that the tool supplied is free of defects in material and workmanship. This warranty is valid so long as the tool is operated and handled correctly, –...
EC declaration of conformity Hilti Aktiengesellschaft Description: Cutter Serial no.: xx/0000001–xx/999999 Designation: DC180-S Dr. Ivo Celi Dr. Heinz-Joachim Schneider Year of design: 2000 Senior Vice President Executive Vice President We declare, under our sole responsibility, that this product Business Unit Diamond Business Area Electric Tools &...
Need help?
Do you have a question about the DC180-S and is the answer not in the manual?
Questions and answers