General Information - Hilti AG 125-S Operating Instructions Manual

AG 125-S/-SE
diamond cutter
It is essential that the operating instructions are read
before the tool is operated for the first time.
Always keep these operating instructions together
with the tool.
Ensure that the operating instructions are with the tool
when it is given to other persons.
Operating controls and components
Ventilation slots
On / off switch
Side handle
Spindle lockbutton
Disc guard release button
Spindle
Disc guard
Contents
1. General information
2. Description
3. Tools and accessories
4. Technical data
5. Safety precautions
6. Before use

1. General information

1.1 Indication of danger
-CAUTION-
This word is used to draw attention to a potentially dangerous situation which could
lead to minor personal injury or damage to the equipment or other property.
-NOTE-
This word is used to indicate instructions and other useful information.
1.2 Pictograms
Warning signs
General Warning:
warning electricity
Printed: 07.07.2013 | Doc-Nr: PUB / 5069435 / 000 / 00
Clamping flange with O-ring
Cutting disc / grinding disc
Clamping nut
Kwik-Lock quick-release nut
Pin wrench
Thumbwheel for speed preselection
(SE model)
Page Contents
13 7. Operation
14 8. Care and maintenance
14 9. Troubleshooting
15 10. Disposal
16 11. Warranty
19 12. Declaration of conformity
Symbols
Warning: Read the
hot surface operating
instructions
before use.
Page
22
23
23
23
24
24
Return waste
material for
recycling
13