Table of Contents
Advertisement
TV + separate UHF and VHF antennas
If UHF and VHF signals are brought into your home with two
separate antennas, you'll need to combine them in order to connect
them to the TV. To do this you will need a UHF/VHF combiner.
Use this hook-up to:
•
connect separate UHF and VHF antennas to your TV.
equipment you will need:
X
X
UHF
300 OHM
X
X
VHF
This is a standard combiner with the following specifications:
Two (2) 300 ohm inputs
One (1) 75 ohm output
(There are different combiners for different kinds of wires. Check
with your local electronics store for the kind of combiner you need.)
procedure:
† Connect the UHF and VHF antenna leads to the appropriate
terminals on the UHF/VHF combiner.
¢ Press the combiner onto the ANT-A terminal on the rear of the
TV.
Basic Connections
75 OHM Out
7
Advertisement
Table of Contents
