Table of Contents
Advertisement
IN
OUT
OUT
one two-way splitter
⁄Important: TV GUIDE Plus+ can control only those types of cable boxes and
TV + cable with a cable box when TV GUIDE Plus
+ will be used
Use this hook-up to:
•
connect a cable box to view premium cable channels and use
TV GUIDE Plus+
equipment you will need:
four lengths of 75 ohm
coaxial cable
procedure:
† Connect the cable system's incoming cable to the IN terminal
on the two-way splitter. NOTE: This splitter must be a type
approved by your local cable provider.
¢ Connect one coaxial cable from one of the OUT terminals on the
splitter to the ANT-B terminal on the back of the TV.
£ Connect a second coaxial cable from the other OUT terminal on
the splitter to the IN terminal on the cable box.
® Connect the third coaxial cable from the OUT terminal on the
back of the cable box to the ANT-A terminal on the back of the
TV.
© Connect the IR emitter to the IR/G LINK. Place one of the
emitter ends in front of the cable box. For more detail concern-
ing the placement of the transmitter lenses, see pages 16 and
17 of this book.
VCRs that can select channels by using the number keypad on
their remote controls.
Basic Connections
Transmitter Lenses
IR Emitter
one IR emitter assembly
(provided with TV)
19
Advertisement
Table of Contents
