Table of Contents
Advertisement
⁄Important: If you are connecting a Super VHS (S-VHS) VCR, use an S-Video
⁄Important: If your VCR is monaural (non-stereo), connect a single RCA pin-
⁄ ⁄ ⁄ ⁄ ⁄
Important: If your VCR has a video channel switch with an "OFF" position, set
.
22
TV + cable with a cable box with TV GUIDE Plus +
(cont.)
§ Connect an RCA pin-type video cable from the VIDEO OUT
terminal on the back of the VCR to the VIDEO INPUT 1 or
INPUT 2 terminal on the back of the TV.
cable instead of an RCA pin-type video cable. Connect this S-Video
cable to the S-VIDEO OUT terminal on the VCR. Connect the
other end of this cable to the S-VIDEO INPUT 1 or INPUT 2
terminal on the back of the TV.
¶ Connect a set of RCA pin-type audio cables to the AUDIO OUT
terminals on the back of the VCR. Use the red cable to connect
the right (R) channel and the white cable to connect the left (L)
channel. Connect the other ends of this cable to the AUDIO
INPUT terminals on the back of the TV.
type audio cable. Connect the cable from the VCR's AUDIO OUT
terminal to the left (L) AUDIO INPUT on the back of the TV.
| Connect the IR emitter cable to the IR OUT /G LINK. Place
one of the emitter ends in front of the cable box. Place the
other emitter end in front of the VCR. For more detail concern-
ing the placement of the emitter lenses, see pages 16 and 17 of
this book.
it to "OFF". See your VCR owner's guide for details
AV Systems Connection Guide
Advertisement
Table of Contents
