Table of Contents
Advertisement
one length of HDTV
control cable
TV + HDTV Receiver (cont.)
use this hook-up to:
•
connect your Mitsubishi HDTV receiver and a cable television
system.
equipment you will need:
one 5-in-1 BNC pin-
type video cable
procedure
† Connect the cable from the outside antenna to the ANT-IN
input terminal on the Mitsubishi HDTV receiver. Connect the
cable system coaxial cable to the ANT A terminal on your
television.
¢ Connect one end of the HDTV control cable to the HDTV
CONTROL terminal of the television. Connect the other end to
the HDTV CONTROL terminal on the receiver.
£ Connect a set of RCA pin-type audio cables from the HDTV
AUDIO terminals on the HDTV receiver to the HDTV AUDIO
jacks on the television.
® Following the color codes, connect the 5-in-1 BNC cable to the
HDTV VIDEO terminals on the back of the TV. Connect the
other ends to the HDTV VIDEO terminals on the HDTV
receiver. The terminal ends are color-coded as follows:
R- red cable
G- green cable
B- blue cable
one set of RCA pin-
type audio cables
one length of coaxial
cable
H- white cable
V- yellow cable
35
Advertisement
Table of Contents
