Maintenance Schedule; General Recommendations - Husqvarna FT900 Operator's Manual

MAINTENANCE
MAINTENANCE
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Engine Oil Level
v' v'
SERVICE DATES
Change Engine Oil _1,2
Oil Pivot Points V t
Inspect Spark Arrester/Muffler V _
Inspect Air Screen V'
Clean or Replace Air Cleaner Cartridge !_2
Clean Engine Cylinder Fins V'
Replace Spark Plug !_
1 - Change more often when operating under a heavy load or in high ambient temperatures,
2 - Service more often when operating in dirty or dusty conditions,
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must maintain tiller
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tiller.
All adjustments in the Service and Adjustments section
of this manual should be checked at least once each
season.
• Once a year you should replace the spark plug, clean
or replace air filter, and check tines and belt for wear.
A new spark plug and clean air filter assure proper
air-fuel mixture and help your engine run better and
last longer.
BEFORE EACH USE
• Check engine oil level.
• Check tine operation.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRICATION CHART")
LUBRICATION CHART
(_ ENGINE
(_) IDLER
ARM
TINE CONTROL
/
(DSAE 30 OR 10W-30 MOTOR OIL
QREFER TO MAINTENANCE "ENGINE" SECTION
10