Tilting And Turning Area; Error Handling - Fujitsu Siemens Computers 21P3 Operating Manual

Tilting and turning area

Error handling

Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another PC and/or with another data cable.
If you cannot solve the problem, contact our Help Desk.
The display is too small or not centered
The monitor recognizes an undefined mode (see
Ê
Adjust the picture size and position (see
Color displacements, color distortions
Ê
Degauss the monitor (see
Striped picture or dull, blurred picture
Ê
Switch the moiré reduction function on (see
Flickering picture
Ê
Set an ergonomic refresh rate (≥ 75 Hz) using the PC software (see documentation for your PC
or your screen controller/graphics card).
No display (power indicator does not light)
Ê
Check whether the monitor is switched on.
Ê
Check whether the power cable on the monitor is connected correctly.
Ê
Check whether the mains socket is live.
A26361-K618-Z100-2-5E19
13°
90°
"Technical
"Operation of the
"Operation of the monitor").
"Operation of the
90°
5°
data").
monitor").
monitor").
Color monitor 21P3
English - 19