Using The Display; Turning On The Display; Function Controls - Fujitsu Siemens Computers L24W-4 Getting Started

Turning On the Display

Turn on the display before turning on the computer. When the power is on, the LED on the power
button lights green and the screen image will appear after about 10 seconds. If the LED doesn't light
green or no image appears, please verify if the display is properly connected.

Function Controls

< >
1,2
3 MENU
4 AUTO
5 POWER
Downloaded from ManualMonitor.com Manuals

Using the Display

OSD Off: Press
Hot key
&
Left / Decrease &
Right / Increase
OSD On: Use these buttons to select or adjust the values of
Hot key
OSD Off: Open OSD
&
OSD On: Select function. (submenu)
SELECT
Hot key
OSD Off: Auto adjustment function.
&
OSD On: Exit OSD.
EXIT
Power On/Off
Power Switch
Blue-Operation mode / Orange-Power saving mode
<
open "BRIGHTNESS" and "CONTRAST"
menu.
>
Press directly to adjust the volume.(only
monitors with audio input)
the selected function.