Using The Display; Turning On The Display; Function Controls - Fujitsu Siemens Computers 22" LCD Monitor Getting Started

Turning On the Display

Turn on the display before turning on the computer. When the power is on, the LED on the power
button lights blue and the screen image will appear after about 3 seconds. If the LED doesn't light
blue or no image appears, please verify if the display is properly connected.

Function Controls

Down / Decrease &
∨ ∧
1,2
Power-Button lock Operating of
3
MENU
4
AUTO
5
POWER
MENU &
3,5 OSD lock function Operating of menu and power buttons at the same time.
POWER

Using the Display

Hot key OSD Off: Press
&
OSD On: Use these buttons to select or adjust the values of the
Up / Increase
selected function.
seconds.
Hot key & OSD Off: Open OSD.
SELECT OSD On: Select function. (submenu)
Hot key & OSD Off: Auto adjustment function. (hold for 1.5 sec)
EXIT OSD On: Exits OSD.
Power On/Off .
Power Switch
Blue-Operation mode / Orange-Power saving mode.
∨
"Mute" and "recover". (hold for 1.5 sec)
∧
Press open input select menu. (hold for 1.5 sec)
∧ ∨
and buttons at the same time for approx. 2