Overhead door ohd anywhere Quick Setup Manual page 6

STEP 4
Wire OHD Anywhere™: (Continued)
Current model Overhead Door Brand opener shown. *See note for other models and brands.
Wire from DCM
*Wiring methods for other garage door openers.
All Overhead Door brand and most competitor brands of garage door openers will operate with OHD Anywhere™. Visit www.
OverheadDoor.com/OHDAnywhere for detailed wire diagrams or to check compatibility with other manufacturer's controls or check your
garage door opener's owners manual for wall control wiring instructions. OHD Anywhere™ will operate up to 3 garage door openers.
OPTION A
Wire DCM Directly to
Garage Door Opener
OPTION B
Back of Wall Control
Connect wire along with
existing wall control wires.
OR
Press in on orange tabs to insert wire into terminals
3 & 4 along with existing wall control wires.
OR
Existing Wall Control Wire.
NOTE: Wires from Wall Control to Garage Door Opener
ARE polarity sensitive. Be sure to reattach to the proper
terminal should they become detached.
Wall control should light when wired correctly.