Toyota tundra 2003 User Manual page 84

2. Lightly push down on the top sur-
face of the anchor bracket cover,
then pull it forward to remove.
78
'03 TUNDRA_U (L/O 0307)
3. Fix the child restraint system with
the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see "Child restraint" in this
section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
4. Replace the passenger head
straint.
Store any removed covers in a safe place
such as the glove box.
Be sure to replace all covers when the
anchor bracket is not in use.
2003 TUNDRA from Jul. '03 Prod. (OM34430U)
re-