Checking Tire Inflation Pressure - Toyota tundra 2003 User Manual

Clean all dirt from outside of the reservoir
tank and look at the fluid level. If the fluid
is cold, the level should be in the "COLD"
range. Similarly, if it is hot, the fluid level
should be in the "HOT" range. If the level
is at the low side of either range, add
automatic transmission fluid DEXRONrII
or III to bring the level within the range.
To remove the reservoir cap, turn it coun-
terclockwise and lift up. To reinstall it,
turn it clockwise. After replacing the reser-
voir cap, visually check the steering box
case, vane pump and hose connections
for leaks or damage.
CAUTION
The reservoir tank may be hot so be
careful not to burn yourself.
NOTICE
Avoid overfilling, or the power steer-
ing could be damaged.
286
'03 TUNDRA_U (L/O 0307)
Checking tire inflation
pressure
Type A (tire and loading informa-
tion label)
Type B (tire and loading informa-
tion label)
2003 TUNDRA from Jul. '03 Prod. (OM34430U)