Toyota tundra 2003 User Manual page 308

"TOP PULL" mark
3. Install the rubber cover with the
"TOP PULL" mark upward, and fit it
securely on the boss. Then plug in
the connector.
Make sure the rubber cover fits securely
on the bulb base and the mounting body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
302
'03 TUNDRA_U (L/O 0307)
—Front fog lights
If either the left or right front fog lights
burns out, contact your Toyota dealer.
NOTICE
Do not try to replace the front fog
light bulbs by yourself. You may dam-
age the vehicle.
—Parking/front turn
signal/front side marker lights
Use a Phillips−head screwdriver. Remove
and install the clip as shown in the fol-
lowing illustrations.
2003 TUNDRA from Jul. '03 Prod. (OM34430U)