Toyota tundra 2003 User Manual page 125

(a) Front drive control (button
type)
'03 TUNDRA_U (L/O 0307)
Use the "2WD/4HI" and "4LO" buttons
to select the following transfer modes.
1. "2WD" (high speed position, two−
wheel drive): "2WD/4HI" and "4LO"
buttons left out
Use this for normal driving on dry,
hard−surfaced roads. This
gives greater economy, the quietest
ride and least wear.
2. "4HI" (high speed position,
wheel drive): "2WD/4HI" button pushed
in
The "4HI" (high speed four−wheel
drive) indicator light comes on when
the "4HI" mode is selected.
Use this for normal driving on wet, icy
or snow−covered roads. This position
provides greater traction than
wheel drive.
3. "4LO" (low speed position,
With the "2WD/4HI"
wheel drive):
button pressed in, push the "4LO"
button
The "4LO" (low speed four−wheel drive)
indicator light comes on when
"4LO" mode is selected.
Use this for maximum power and trac-
tion. Use "4LO" mode for climbing or
descending steep hills, off−road driving,
and hard pulling in sand, mud or deep
snow.
See "(c) Shifting procedure (button type)"
for further instructions.
position
four−
two−
four−
the
2003 TUNDRA from Jul. '03 Prod. (OM34430U)
119