Installing The Cover; Removing The Front Bezel - Dell OptiPlex 9010 Owner's Manual

Installing the Cover

1. Place the cover on the computer.
2. Slide the computer cover towards the front of the chassis until it is fully engaged.
3. Tighten the screw in clockwise direction to secure the computer cover.
4. Follow the procedures in

Removing the Front Bezel

1. Follow the procedures in
2. Remove the cover.
3. Pry the front panel retention clips away from the chassis located at the side edge of front bezel.
4. Pry the front bezel away from the computer to release the front bezel from the chassis.
After Working Inside Your Computer .
Before Working Inside Your Computer .
9