Dell OptiPlex 9010 Owner's Manual page 42

Option
Table 8. POST Behavior
Option
Numlock LED
Keyboard Errors
POST Hotkeys
Table 9. Virtualization Support
Option
Virtualization
VT for Direct I/O
Trusted Execution
Table 10. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
Table 11. Image Server
Option
Lookup Method
42
Description
• Block Sleep (S3 state) - This option is disabled by default.
Description
Specifies if the NumLock function can be enabled when the system boots. This option
is enabled by default.
Specifies whether keyboard related errors are reported when it boots. This option is
enabled by default.
Specifies whether the sign-on screen displays a message, that displays the keystroke
sequence required to enter the BIOS Boot Option Menu.
• Enable F12 Boot Option menu - This option is enabled by default.
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
additional hardware capabilities provided by Intel Virtualization technology.
• Enable Intel Virtualization Technology - This option is enabled by default.
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
hardware capabilities provided by Intel® Virtualization technology for direct I/O.
• Enable Intel Virtualization Technology for Direct I/O - This option is enabled by
default.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can
utilize the additional hardware capabilities provided by Intel Trusted Execution
technology. The TPM virtualization technology, and Virtualization technology for
direct I/O must be enabled to use this feature.
• Trusted Execution - This option is disabled by default.
Description
Displays the Service Tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
Controls the SERR message mechanism. This option is not set by default. Some
graphics cards require that the SERR message mechanism be disabled.
Description
Specifies how the ImageServer looks up the server address.
• Static IP