Installing The System Board - Dell OptiPlex 9010 Owner's Manual

Installing the System Board

1. Align the system board to the port connectors and place the system board in the chassis.
2. Tighten the screws securing the system board to the chassis.
3. Connect all the cables to the system board.
4. Install the speaker.
5. Install the WLAN Card.
6. Install the front Input/Output panel.
7. Install the memory.
8. Install the processor.
9. Install the heat sink.
10. Install the power supply.
11. Install the system fan.
12. Install the drive cage.
13. Install the front bezel.
14. Install the cover.
15. Follow the procedures in
34
After Working Inside Your Computer .