Programmable Alarms - ACU-RITE 01036 Instruction Manual

Programmable Weather Alarms
Each Selectable Weather Category features an alarm option. When an alarm
sounds, the display emits audible beeping and flashes the affected category, its
alarm settings, and any other relevant data.
Some alarms can be customized to alert you when your programmed value is
reached. Alarms include:
The rain alarm does not require a preset numerical value, but instead sounds
as soon as rain is recorded. Similarly, the storm alarm sounds when a large
atmospheric pressure drop occurs, which usually indicates an oncoming storm.
Note: The storm alarm is NOT intended to be a safety device or warning system.
Set a Weather Alarm
1. Choose the weather category for which you wish to set an alarm by
pressing the "▲" or "▼" buttons until the category is displayed on the
Selectable Category part of the display.
2. To program a value (only applies to alarms that require a value), press
AND HOLD the "
" " indicator appears and the alarm setting flashes.
3. Adjust the alarm value by pressing the "▲" or "▼" buttons.
4. Press the "
5. Next, press the "
disappears when alarm is activated).
Alarm is now programmed and turned on.
OUTDOOR HUMIDITY
OUTDOOR TEMP
STORM ALARM
INDOOR HUMIDITY
INDOOR TEMP
WIND CHILL
DEW POINT
HEAT INDEX
RAIN
WIND SPEED
" button underneath the alarm you wish to set until the
" button to confirm a value.
" button to activate the alarm (the X indicator
LOW HIGH
LOW HIGH
HIGH
LOW HIGH
LOW HIGH
LOW
LOW HIGH
HIGH
HIGH
HIGH
17