Jumper Settings For Wake-On-Ps/2 Kb/Mouse - DFI NS30-SC/SL User Manual

2.4 Jumper
Keyboard/Mouse
1-2 On: Disabled - VCC
Wake-On-PS/2 Keyboard/Mouse - Jumper JP1
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the
PS/2 keyboard or PS/2 mouse to power-on a system from the S3/
S4/S5 state. By default, JP1 is disabled. To use this function, set JP1 to
2-3 On. "PS2 Mouse Power Up Control" and "KB Power On
Password" ("PM Wake Up Events" field) in the Power Management
Setup submenu of the BIOS must be set accordingly. Refer to
chapter 3 for details.
Warning:
• The power button will not function once a keyboard
password has been set in the "KB Power On Password"
field. You must type the correct password to power-on the
system.
• The 5VSB power source of your power supply must
support ≥ 720mA.
Settings
1 2 3
2 3
1
(default)
Hardware Installation
for Wake-On-PS/2
Wake-On-PS/2
KB/Mouse (JP1)
1 2 3
2-3 On: Enabled - 5V_DUL
2
23