Jig For Servicing - Denon AVR-E400 Service Manual

JIG FOR SERVICING

When you repair the printing board, you can use the following JIG (Extension cable kit).
Please order it from DENON Official Service. Distributor in your region if necessary.
NOTE: The incorrect connection with in the JIG (EXTENSION UNIT KIT) may cause damage.
• Connection of PCB HDMI JIG
-Preparation-
8U-110084S : EXTENSION UNIT KIT : 1Set
8U-110136S : EXTENSION UNIT KIT : 1Set
Insulation sheet (Do not supply it)
Ground lead (Do not supply it)
-Procedures-
(1) Remove the screws.
(2) Disconnect the connector board.
Board to board
: 1 sheet
: 2 pc
52
Board to board PCB HDMI