Vision techconnect control 3 Owner's Manual page 13

f. Click Save. You will have just created a list of new codes, so you need to assign
a specific new code to the button using the drop-down menus.
Note: Each button can be assigned up to three of same type of codes e.g. 3 x IR, 3 x RS-
232, 3 x 12v.
7. EDIT CODES Click on edit. You can only edit codes that have been created by users. The
preset library Vision includes cannot be modified.
SCHEDULE LAST
8.
been learnt first.
If setting up the scheduling function do this last. All of the codes have
13
TC2-CTL3_manual_en